Smoke Switch For The Idiots
 

Alright I can't take it anymore with these idiots around here i live. I want one and will promise to only use it for the ones that really deserve it. :argh:

Is there a way to SAFELY make up a smoke switch on the D'Max?

I don't want to set codes if I use it and I don't want to hurt anything either.

:pca1:

I have been thinking about this alot lately actually. And the only way I can think of that would be a "smoke switch" is to put a cable operated valve, or electronic valve on the IC tube, where its tapped for the boost gauge. Then, at will, you could flip the switch to open the valve, or pull the cable to open it, and you would lose boost, therefore creating LOTS OF SMOKE..


Just a thought.

but wait.. I see a certain DMAX KNowledgebase is also viewing this thread.. :humm:


C'mon Rick.. hopefully you can shed some light on how we can do this?

dsp switch :D

or electronic BOV

I like killing the boost for the shear smoke of it all, but you loose power when doing this too. You can also set some under boost codes IIRC. It would need to be metered and fine tuned for the best results.


A dsp 2 or 5 switch gets the job done for sure. Thats what I use. :U:

Tuners can set up a "smoke" tune and still have just the right amount of power.

BTW, we need a smoke smilie! I'll see if I can find one.

i need to rig my dsp5, but im too lazy to mount the dern switch and write a tune for it, but a smoke tune would be nice to have to mess with peoople

when I had my smoke switch installed my fav 2 uses were on kids taggin up bust stops, and floks too lazy to walk into blockbuster/ parked in the fire zone. now I got a smarty and don't need a switch :D

efi live > smarty

:moon:

Yes but.... Cummins > Duramax


















:moon::tttt: :lol88:

dsp2 and dsp5 is great, unless you have an LBZ/LMM... hmm..


What can I adjust on my PPE to create more smoke?:humm: