bobbed83toy |
01-28-2012 12:09 AM |
#8 injector removal on a C4500
I am newbie here, but have 15 years experience as a diesel tech, mainly fords. I just started working for a guy who has 30 plus years of experience and is a ford master tech and ase cert med/heavy and auto master tech. This guy knows his fords inside and out. I am currently working a 2005 GMC kodiak c4500 with a LLY duramax 247,485 miles. The number two injector has dumping out fuel so I have a fuel knock. I pulled all glow plugs, and cranked engine over, #2 spraying tons of fuel out.. ran compression test, all at 620-630psi. So i am pulling all injectors to have them tested. 1-7 came out super easy, 8 on the other hand is a pain in the tail end. drivers side rear of engine, injector only comes out a little and then hits bottom of cab. I am having a hard time figuring a way to get this out. i have removed transmounts and dropped tranny down to tilt engine down, just need like a half inch, Im at the point were im going to pull the engine motor mounts and drop engine as I drop tranny. Anyone ever done one of these before.
|