I can use air house on the sending unit with it plugged in and the key on and it'll read. I'll check the feed line when I get home. everyone I talk to says CP3 ECM FICM so I'm running outta idea to I'm going to try to get a buddy to come in from outta town and check the fuel pressure when cranking

I'm pulling for ya little dude!

make sure when you are checking fuel pressure you at some point unplug the pressure regulator to make sure it is not an ECM problem holding it shut.

what you want to watch for with the scan tool is "desired fuel pressure" and "actual fuel pressure". desired should be somewhere around 4-5k PSI or 27-35 Mpa. cranking RPM should be at least 100 RPM cold and 180 RPM hot

try it with a cap full of gasoline in the intake too to bust RPMs and see if pressure is higher

if you are getting pressure and no start then check the crankshaft position (CKP) sensor and the camshaft position (CMP) sensor. both of these can cause a no start condition even if everything else is ok

thanks for all the help guys I'll be doing the tests when I get home. and I hope it's something simple so I can save my money up

it'll be a few weeks before my buddy can come scan her to see what's wrong

GREAT NEWS! not this weekend but next i got a guy coming out all day sat and he'll spend the whole day here for $100:tu:

definitely let us know what he finds:pca1:

will do i hope i can get her rollin!!

Any news? Ya get er rollin?

not yet he couldnt come this weekend but this weekend he will so wish us luck haha the D-Max needs to get rollin