got my truck running today.. found more issues the mice have chewed the wires to the ecm fixed all the wires. Now thinking I need a pmd it gets so hot you can't touch it and yes I have the relocation kit. When the pmd gets hot the engine dies. I am picking up a new pmd in the morning hoping this fixes the probem. I replaced the starter this morning was having issues with it. also replaced the LP and the OSP so hoping I'm narrowing in on the actual issue. :humm:
|
also check for gound ground on PMD wiring harness . That could be cause of PMD getting hot also where is it relocated and I use a Super cooler . seems to cool better I found them on Ebay for $30.00 . Also make sure that Fuel shutoff silinoid on Injection pump is wiorking . I had a close to same promblem and turned out to be a faulty shut off. While engine running just tap on side Lightly with a plastic handle of screw driver. and she if it stubbles engine if so replace it.
|
All times are GMT -5. The time now is 07:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands