|
Its prob armature inside inj pump behind were fuel lines hook to inj pump had same problem got the piece 115 bucks but have to re calibrate pump wen installed.
|
I had the same code I bought a new pmd from accurate diesel it was expensive but truck runs great!! I have a #9 resistor fsd heat sync all together shipping and 6' harness 419$ but like I said it runs so smooth you wouldn't believe the weird thing a bad pmd could do also another thing you could check is the harness on top of the intake behind your fuel filter housing it's a really big square harness it's known to build a lot of corrosion
|
So I'm getting this same code but my truck isn't acting different runs and sounds fine can it be anything else tried deleting the code comes back any ideas
|
Originally Posted by Crazy
(Post 625100)
K getting code p0216 i know it has to with timing so what have done
change out the stepper motor and ran some cleaner thought a tank fuel clean and check all grounds check lift pump good replace fuel filter even swap out PMD with 3 diff ones truck seem run great going down the road at any speed but in the driveway in park if take rpms 2000 it ok and if take it to 2200 - 2300 its get ruff and lot white smoke now have clear the code and go down road 25 to 100 miles no light comes on but next time start it it will come back on and clear agian go 10 miles down the road and come back on. but like i said it run great with os with out ses light thanks for any help Bruce |
| All times are GMT -5. The time now is 12:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands