gooseneck hitch stuck
 

My B&W turnover ball hitch is stuck. Anybody have any ideas on how to remove it?

:hi: rusted stuck? ball up or down

Penetrating oil and BFH!!:ok1:

oil and heat

I usually have mine freeze upside down in the winter but hot water and a hammer work.

as far as now I would use some penetrating oil and a hammer to free it up, Once you've got it out put some grease on it to keep this from happening again. (Hammer from under the truck)

Ian

:hi: :c:

It hasn't been used in a while and was rusted shut. I sprayed with PB Blaster and then I heated it with a torch. I tried a hammer from underneath, but it wouldn't budge. So, I used a hydraulic jack on the underside and pounded on the top. It came out little by little (had to re-adjust the jack a few times) until it was finally free! Thanks guys for all the suggestions!

:hi: Enjoy the forum. :c:

:hi: PB Blaster is some good stuff.