Originally Posted by Dirty Offio
(Post 930276)
H.R.D.,
Yeah, I want to build (to my mind anyway) the ultimate hotshot rig, and I wanted one to put on it. Ran hotshot about 3 years ago with a 2nd gen Dodge Cummins 3500, and thought it sucked that everytime I hit a hill in the summer, I had to kill the AC and broil so the dang truck wouldn't overheat. I figure with a roof mount unit like that, it should be no problem to run the AC while pulling hard, since the condenser is not in front of the radiator. My idea for the truck is: 79 Ford F series cab and front clip. (front clip modded to tilt) Isuzu Medium duty frame (24 feet) Dana 80 rear 3 speed brownie 5 speed trans (NV4500) 6V-53T Detroit under the hood 48" sleeper Nice flatbed :c: ---AutoMerged DoublePost--- Tiremann, Yes they do. They are (to the best of my knowledge) round, and about 6 inches across. Generally mounted on top of or behind the sleeper or cab towards the top. |
Originally Posted by tiremann9669
(Post 930577)
You're right they are round more like a foot across and usually white. The AC unit you posted the link to also mounts on the rear wall of the sleeper, not on top. The roof mounted ones are most likely 110 units like an RV and have an on board generator to power them wich also comes in handy for a TV, microwave, etc. :c:
:c: |
they are passing a law in CA to get rid of the APU's all together and making the trucks cool the sleeper off of battery power.
|
Originally Posted by Dirty Offio
(Post 930276)
H.R.D.,
Yeah, I want to build (to my mind anyway) the ultimate hotshot rig, and I wanted one to put on it. Ran hotshot about 3 years ago with a 2nd gen Dodge Cummins 3500, and thought it sucked that everytime I hit a hill in the summer, I had to kill the AC and broil so the dang truck wouldn't overheat. I figure with a roof mount unit like that, it should be no problem to run the AC while pulling hard, since the condenser is not in front of the radiator. My idea for the truck is: 79 Ford F series cab and front clip. (front clip modded to tilt) Isuzu Medium duty frame (24 feet) Dana 80 rear 3 speed brownie 5 speed trans (NV4500) 6V-53T Detroit under the hood 48" sleeper Nice flatbed :c: ---AutoMerged DoublePost--- Tiremann, Yes they do. They are (to the best of my knowledge) round, and about 6 inches across. Generally mounted on top of or behind the sleeper or cab towards the top. Sounds like a hell of a setup if you ask me. :c: |
Originally Posted by 2500HeavyDuty
(Post 930718)
they are passing a law in CA to get rid of the APU's all together and making the trucks cool the sleeper off of battery power.
Leave it to California! I can barely speak.......the urge to cuss is that strong! :scare2: With all the electronics that new trucks have onboard (before you add all the electonics that the driver adds) The LAST thing that trucks can handle is cooling the sleeper to a comfy temp in 90+ degree heat from the bloody batteries! :nope::nope::s::s: Someone down there needs a bit o' this :bat::bat::bat: !!! ---AutoMerged DoublePost---
Originally Posted by H.R.D
(Post 930731)
Sounds like a hell of a setup if you ask me. :c:
Don't bloody like that state. Actually, the STATE is fine...if you get rid of about 97% of the population it would be great!!! :c: |
Finally got passed by a van that had one of these today at a slow enough speed I could write down the name on the unit! (Who sez rush hour traffic has NO uses! lol) While I was looking for information on them, I found reference to another unit. Check these out.
Zanotti Carrier transicold Europe The second unit is talking about a split unit...but it is a varient on their non-split one if I am reading it right. |
Pretty damn cool IMO. Which way are you leaning? I like that Carrier one myself. :pca1:
|
Originally Posted by H.R.D
(Post 932039)
Pretty damn cool IMO. Which way are you leaning? I like that Carrier one myself. :pca1:
|
True true well keep us informed if you go through with it. :c:
|
Will do! :c:
|
All times are GMT -5. The time now is 11:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands