I've got a hot pipe and cold pipe for a wh1c to 3b made. The cold pipe is two piece, gives it better flexing if the turbos aren't perfectly lined up and includes the three silicone connectors and six clamps. I'm building one right now for a he351 to s400. The pipes are raw so you can paint them yourself.

I was thinking 350 shipped for the hot and cold pipe on this set made. The hot pipe is one I got with another set.

The other sets I am making will be a little higher as the hot pipe will be made out of 3 inch schedule 10 stainless.

The only holdup is I will be out of state for work for a couple of weeks so I might answer pm's but can't ship anything.

I also have some t-6 1/2 inch thick flanges for both 3b's and s400's. 25 each shipped.

If interested please give me some time, as I'm just getting back into building this stuff. Also if paypal add .04 percent.

I'm just feeling if there's any interest, Thanks,Gary

 

i figured ppl would be intrested for the price

 

I did too. I got home and have pictures now,need a phone number if you want to see them. I also have a bolt on spring wastegate and the compressor housing that has a 3 inch outlet welded to it so a silicone hose connector can be used. I would sell the whole setup for 450. 900 plus shipping and someone can have the wh1c and the 3b with it.

 

I think the stocker(351)/s400 is the ticket. People will be more inclined to have that.

 

I'm building a set right now, just got the hot pipe done today. I've had the hot pipe for awhile so I figured I would put a set together and sell them cheap. Just looking for my labor on top of what I have in cost in them.

Should have a cold pipe built early this week. I might put this set on my truck to see if there's any difference in the s400 and ht60 but I but it ain't much if any.

 

I am just thinking you can target the common rail crowd with a 351/400 setup. Should also state what you are gonna put in the kit for the price, and what people will have to source themselves. Take the guess work out of it.

People are lazy, they want to know what they need, and how much it will cost total.

 

I don't have a way of fitting a set on a third gen. As far as the rest of the stuff like drains and supply hoses they can be had off the shelf. I could make the air breather hose but both of my trucks have had the batteries moved. The exhaust I like to build in the truck to allow for minor differences in mounting and other stuff.

I just figured if you have the the two turbos mounted the rest has to fall in place to them. I've done enough fab work this stuff is easy for me so I forget how hard it is for some people.

 

Price for hot and cold pipes outta mild steel?

 

For a Stocker to ht3b, sorry

 

id also be interested in a mild steel system putting an s400 with my stock hx-35. pm price if you wanna build one of those.