2007 Ford F350 - Never Done
Thread Starter
|
Staff Reporter
Joined: May 2007
Posts: 16,929
Likes: 54
2007 Ford F350 - Never Done
2007 Ford F350 - Never Done
Sometimes, if you do it right, work can be as much fun as play, and Jeremy Griffith of Orlando, Florida, has found the right combination. He works in the family business, Wal-Rose Site Development, and enjoys driving his truck for business and pleasure. He's had lots of work trucks in the past and has also found time to create three full-blown custom trucks such as this '07 F-350 Super Duty. The build on this one was interesting, however.
Jeremy was in the middle of customizing an '03 Super Duty when a friend called to tell him about the new '07 trucks that had just hit the dealer lots. As it turned out, it took very little persuading once he saw one of the new trucks on the showroom floor. Before long, the '03 found a new home, and Jeremy turned his attention to personalizing his new Outlaw Edition '07 F-350 Lariat crew cab.
Lifted, Not LoweredJeremy has always been into lifted trucks and had a clear idea of what the new truck would look like. He does all his own work and began the project by upgrading the factory Ford front and rear axles with 4.56 gears for better low-end performance.
He ordered Fabtech's 8-inch radius-arm suspension package for the front end, featuring tubular arms; strong, dimpled side plates; and adjustable alignment cams for correct caster. The 8-inch replacement coil springs were augmented with Daystar spacers to add another 2 inches of lift along with Fabtech's track-bar relocation brackets, a pitman arm, bumpstop mounts, and steering stabilizers.
The rear uses Fabtech's rear spring-hanger system with 3-inch spring-hanger brackets and soft-ride leaf springs combined with 2-inch blocks to create the 10-inch lift in the rear. Fabtech's nitrogen-filled shocks damp all four corners.
All the components were powdercoated candy-apple red with gold flake for a custom touch, and once the parts were on hand, it took Jeremy just five hours to complete the installation. For an appropriately imposing look, he outfitted the F-350 Lariat with big 22x11.50 MHT Driv NT-1 rims fitted with Toyo 40x15.50R22 Open Country M/T rubber.
6.0L Power and MPG UpgradesBig rubber needs big power behind it, and Jeremy directed his attention to the 6.0L Power Stroke diesel under the new Ford's hood. Sniper Performance in Sanford, Florida, added its Sniper programmer for sizable horsepower, torque, and transmission upgrades. An AFE cold-air induction system speeds the flow of incoming air while the 4-inch RBP custom exhaust dumps into a 6-inch satin black tip. The changes mean this truck performs well and looks good, now boasting a healthy 400 hp at the wheels, more than enough to spin the 40-inch tires on demand. Amazingly, the truck still delivers 16 mpg.
Killer StereoWith the horsepower and lift upgrades accomplished, lots of drivers would have been satisfied, but Jeremy wanted to take the truck to the next level. He likes his music loud and contacted the experts at Executive Auto Design in Sanford.
They put an entertainment package together that achieved results far beyond what you'd expect in a truck this strong. Both the cab and bed were brought into play to hold the elaborate audio-visual system. Control begins with the Kenwood double-DIN AM/FM/CD/DVD player feeding multiple audio and visual outlets. Two pairs of Cadence CVL three-way, 6 1/4-inch component sets in each front door are augmented with separate tweeters, along with a set of 5 1/4-inch components in the kick panels. The mids and highs up front are balanced by a similar package in the rear doors, each holding another pair of components. All four doors were fitted with custom fiberglass enclosures that showcase the speaker mix.
Show-Truck InteriorThe centerpiece of the install is the center console, running from the dash to the rear cab wall. New rear bucket seats, upholstered to match the Outlaw Edition front seats, add to the uniqueness of the package. The large Icon 10 1/4-inch video monitor on top of the console gives front-seat passengers a perfect view while the back-seat riders have smaller screens angled for their entertainment. On either side, you'll see a pair of JL Audio 1001 amplifiers that power the system, and moving to the rear, you'll discover a head-turning arrangement for the rear-mounted subs. After cutting a pass-through in the rear cab wall, the install team created a polished plexiglass housing that accommodates a half dozen T3 Audio 12-inch subs. To ensure the subs had the appropriate air space, the enclosure extends into the bed of the truck, adding visual interest as well as hard-hitting sound. Plexiglass windows in the bed give spectators a chance to view the combination of artistry and audio engineering.
Finished?The truck has become a regular weekend driver, but that's not the end of the story. Jeremy's truck is different every minute, so it's like taking pictures of a moving train. Soon after this photo shoot was completed, the truck was back in the shop for major revisions that include new paint and an all-new interior. Stand by, we may be seeing this work (always) in progress again.
Photo Gallery: 2007 Ford F350 - Custom Lifted Diesel Truck - Diesel Power Magazine
Read More | Digg It | Add to del.icio.us
More...
Sometimes, if you do it right, work can be as much fun as play, and Jeremy Griffith of Orlando, Florida, has found the right combination. He works in the family business, Wal-Rose Site Development, and enjoys driving his truck for business and pleasure. He's had lots of work trucks in the past and has also found time to create three full-blown custom trucks such as this '07 F-350 Super Duty. The build on this one was interesting, however.Jeremy was in the middle of customizing an '03 Super Duty when a friend called to tell him about the new '07 trucks that had just hit the dealer lots. As it turned out, it took very little persuading once he saw one of the new trucks on the showroom floor. Before long, the '03 found a new home, and Jeremy turned his attention to personalizing his new Outlaw Edition '07 F-350 Lariat crew cab.
Lifted, Not LoweredJeremy has always been into lifted trucks and had a clear idea of what the new truck would look like. He does all his own work and began the project by upgrading the factory Ford front and rear axles with 4.56 gears for better low-end performance.
He ordered Fabtech's 8-inch radius-arm suspension package for the front end, featuring tubular arms; strong, dimpled side plates; and adjustable alignment cams for correct caster. The 8-inch replacement coil springs were augmented with Daystar spacers to add another 2 inches of lift along with Fabtech's track-bar relocation brackets, a pitman arm, bumpstop mounts, and steering stabilizers.
The rear uses Fabtech's rear spring-hanger system with 3-inch spring-hanger brackets and soft-ride leaf springs combined with 2-inch blocks to create the 10-inch lift in the rear. Fabtech's nitrogen-filled shocks damp all four corners.
All the components were powdercoated candy-apple red with gold flake for a custom touch, and once the parts were on hand, it took Jeremy just five hours to complete the installation. For an appropriately imposing look, he outfitted the F-350 Lariat with big 22x11.50 MHT Driv NT-1 rims fitted with Toyo 40x15.50R22 Open Country M/T rubber.
6.0L Power and MPG UpgradesBig rubber needs big power behind it, and Jeremy directed his attention to the 6.0L Power Stroke diesel under the new Ford's hood. Sniper Performance in Sanford, Florida, added its Sniper programmer for sizable horsepower, torque, and transmission upgrades. An AFE cold-air induction system speeds the flow of incoming air while the 4-inch RBP custom exhaust dumps into a 6-inch satin black tip. The changes mean this truck performs well and looks good, now boasting a healthy 400 hp at the wheels, more than enough to spin the 40-inch tires on demand. Amazingly, the truck still delivers 16 mpg.
Killer StereoWith the horsepower and lift upgrades accomplished, lots of drivers would have been satisfied, but Jeremy wanted to take the truck to the next level. He likes his music loud and contacted the experts at Executive Auto Design in Sanford.
They put an entertainment package together that achieved results far beyond what you'd expect in a truck this strong. Both the cab and bed were brought into play to hold the elaborate audio-visual system. Control begins with the Kenwood double-DIN AM/FM/CD/DVD player feeding multiple audio and visual outlets. Two pairs of Cadence CVL three-way, 6 1/4-inch component sets in each front door are augmented with separate tweeters, along with a set of 5 1/4-inch components in the kick panels. The mids and highs up front are balanced by a similar package in the rear doors, each holding another pair of components. All four doors were fitted with custom fiberglass enclosures that showcase the speaker mix.
Show-Truck InteriorThe centerpiece of the install is the center console, running from the dash to the rear cab wall. New rear bucket seats, upholstered to match the Outlaw Edition front seats, add to the uniqueness of the package. The large Icon 10 1/4-inch video monitor on top of the console gives front-seat passengers a perfect view while the back-seat riders have smaller screens angled for their entertainment. On either side, you'll see a pair of JL Audio 1001 amplifiers that power the system, and moving to the rear, you'll discover a head-turning arrangement for the rear-mounted subs. After cutting a pass-through in the rear cab wall, the install team created a polished plexiglass housing that accommodates a half dozen T3 Audio 12-inch subs. To ensure the subs had the appropriate air space, the enclosure extends into the bed of the truck, adding visual interest as well as hard-hitting sound. Plexiglass windows in the bed give spectators a chance to view the combination of artistry and audio engineering.
Finished?The truck has become a regular weekend driver, but that's not the end of the story. Jeremy's truck is different every minute, so it's like taking pictures of a moving train. Soon after this photo shoot was completed, the truck was back in the shop for major revisions that include new paint and an all-new interior. Stand by, we may be seeing this work (always) in progress again.
Photo Gallery: 2007 Ford F350 - Custom Lifted Diesel Truck - Diesel Power Magazine
Read More | Digg It | Add to del.icio.us
More...
Diesel Bomber
Joined: Aug 2007
Posts: 6,157
Likes: 371
From: TIKRIT, IRAQ
That is his street truck......this is the play toy.....
Blown 600+ inch Alky injected big block chevy.....Patrick Enterprises center sections (Dan Patrick of SAMSON monster truck fame) with IH Combine Planetaries.....i watched him pull the front wheels off the ground about a foot right after that pic was taken by just stabbing the skinny pedal real quick.....im tires are about 5 feet tall.....
Blown 600+ inch Alky injected big block chevy.....Patrick Enterprises center sections (Dan Patrick of SAMSON monster truck fame) with IH Combine Planetaries.....i watched him pull the front wheels off the ground about a foot right after that pic was taken by just stabbing the skinny pedal real quick.....im tires are about 5 feet tall.....
Thread
Thread Starter
Forum
Replies
Last Post
1ATony
1A Auto Parts
1
Dec 7, 2015 01:09 PM
1ATony
1A Auto Parts
1
Oct 26, 2015 02:44 PM
1ATony
1A Auto Parts
0
Sep 2, 2015 01:24 PM
1ATony
1A Auto Parts
0
Sep 2, 2015 01:03 PM
Diesel Bombers
General Diesel Related
0
Jan 5, 2015 11:50 AM
