When you guys are plumbing you FASS or air dog pumps with filters, are you running hose all the way to the FICM, removing the stock filter housing, installing new pickup tube, or just cutting into the stock steel line? Any info would help!

 

Obviously this is not the forum for me!! I just joined a few weeks ago and dont have a very good first impression. I don't know if its because im a new guy but it looks like I will find another forum!

 

ok have fun.

I installed a pump and filter housing into the steel line. If you have a water separator and 2 micron filter on the set up you want to use I would see nothing wrong with bypassing the stock filter.

Most the systems sold come with install instructions.

 

excuse me i havent been around due to unfortunate circumstances but anyhoo


the fass and air dog systems use the stock steel lines to feed the cp3 with fuel, they provide you with the adapters and quick disconnect fittings to do so, and that set up is good for just about anybody