6.0L Performance Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels Related To Performance And Longevity

Power Hungry Performance tunes

Thread Tools
 
Search this Thread
 
Old Jun 3, 2010 | 09:10 PM
  #1  
Cowboy Cadillac's Avatar
Thread Starter
|
Diesel Fan
Joined: May 2010
Posts: 99
Likes: 3
From: Rock Hill, SC
Default Power Hungry Performance tunes

Does anyone have any tunes from PHP??
 
Reply
Old Jun 3, 2010 | 11:13 PM
  #2  
Mdub707's Avatar
BOMBARDIER
Joined: Oct 2007
Posts: 8,208
Likes: 630
Default

There are a lot of 7.3 guys who have them and like them. I know for 6.0's they do a lot of FICM stuff too, since they're 1 of 2 companies that I know that do it. I have NOT heard of a lot of guys running their standard tuning for the SCT's though, but it seems like they're relatively new to the scene.
 
Reply
Old Jun 3, 2010 | 11:26 PM
  #3  
FRIDAY88's Avatar
Diesel Enthusiast
Joined: May 2010
Posts: 298
Likes: 7
From: BATTLE MOUNTAIN
Default

My FICM is programed threw PHP i love it two MPG better roughly but no powergain
 
Reply
Old Jun 4, 2010 | 06:28 AM
  #4  
HeavyAssault's Avatar
Diesel Wrench
Joined: Jan 2009
Posts: 854
Likes: 62
From: VA
Default

Same here on the FICM tuning..worth the time and effort!!
 
Reply
Old Jun 8, 2010 | 03:56 PM
  #5  
lubbockguy1979's Avatar
Diesel Fan
Joined: May 2010
Posts: 32
Likes: 1
Default

Bill at php does not tune sct devices. He does specialize in fords and was "the" or one of "the" guys that developed the software/ tuning devices for edge performance. He can reformat a edge evo tuner into a gryphoon or you can buy a gryphoon. The plastic cover is different and the tunes are different. If I recall correctly the story is edge is working on carb and other epa stuff and they cannot offer that if they have custom tunes avalible. I've looked it over and it seems that since they can use the evo to do remote ficm tuning it would be a nice piece to have. They don't seem to have as high hp tunes as most sct tuners claim. Never seen a dyno sheet on gryphoon vs sct though. If I had a edge evo though I'd probably try it out though.
 
Reply
Old Jun 8, 2010 | 04:17 PM
  #6  
Mdub707's Avatar
BOMBARDIER
Joined: Oct 2007
Posts: 8,208
Likes: 630
Default

Spartan had the capability to do the FICM tuning via the programmer too with their phalanx, but again, there is no following and no service to go with it.
 
Reply
Old Jun 8, 2010 | 04:46 PM
  #7  
lubbockguy1979's Avatar
Diesel Fan
Joined: May 2010
Posts: 32
Likes: 1
Default

Spartan can.. Or nutty (mike I think from kem performance) will bench tune the ficm still. The ficm tuning on the phalanx for the 6.0 last I heard was still on the to do list. 1 or 2 of the beta testers had it functional I believe.
 
Reply
Old Jun 8, 2010 | 04:57 PM
  #8  
Mdub707's Avatar
BOMBARDIER
Joined: Oct 2007
Posts: 8,208
Likes: 630
Default

yes the beta guys did have it. Though they were not noticing the gains that the guys who had tuned their FICMS right at Innovative were noticing, still a nice function though. I'm not expecting the phalanx to come out with a big following for the 6.0 ever. They're just too busy doing 6.4 stuff. Not to mention the market for the 6.0 is not huge since most guys already have some sort of programmer and are going to have a hard time dropping $1000 on the phalanx.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cumminsambitionist
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
Jul 5, 2015 12:52 AM
Diesel Bombers
General Diesel Related
0
May 6, 2015 03:20 PM




All times are GMT -5. The time now is 05:47 AM.