I am at wits end. I bought a new tranny pan from goerend for my 1996 RAM 2500 47re and installed with the supplied gasket and torqued in a star pattern to the specified torque of 10 ft pounds. Still leaked. Reinstalled with the right stuff on the pan and let cure before torquing. Still leaked. Reinstalled with gasket and the right stuff on pan and tranny. Still leaked. Any help would be greatly appreciated.

 

Are you sure it is the pan leaking?

I've never had this issue.

 

I was just reading on another site to torque to 10 in a star pattern, then torque to 13 in a star pattern.