Hey all! New to the forums here and was wanting to start a Third Gen Hemi truck to 12 Valve conversion sometime either this winter or this coming spring and was hoping someone could help me with a few questions I have about such a swap. First off I know to get some gauges and other things working I would need at least a common rail alternator and tone ring (for the tach) to start off. But what I'm needing help on is if anybody knows what I would need in terms of drive shafts and if anyone has done a third gen conversion that uses an automatic over a 5 speed. I have both a 1994 Cummins that's a little rough around the edges, but runs and drives and gets me from A to B and just picked up a 2003 Ram 2500 4x4 Hemi Heavy Duty to swap the 94 stuff into. Any help would be appreciated!