JW about injectors???
 

So I was wondering whats the biggest injectors I could put on my truck with pmr's? That with a custom tuned chip and my garrett R38bb and exhaust and intake would put me at 400-450 HP?
Would I need a hpump too?
The adrenaline hpump is on my list for by the end of the summer, unless it's completely not needed?

Some small hybrids like a 238/100 or even some large stage 2's like a 180/100 would do pretty good. Either one with a 38r is going to be a nice running truck in your power range.

I would do the injectors first and then get a scanner to see what your HPOP is doing, once you look at the pressures its running, if it is worn, throw an adrenaline in there.

wouldnt the hybrids be too much power for the pmr's?

it all in the tuning, but i wouldn't push it much over a 160/100 (stage 2) thats just me though, i dont like walking too much lol

Its all in the tuning... Timing...

I could show you tuning that would SCARE you...

I would have no issue throwing a set of 238/80 or 238/100 hybrids in a PMR motor with the right tuner at the controls...

ok so who would u guys suggest for tuning?
i was looking around and swamps has hybrid injectors that are "400hp" 200/30% "400hp" Hybrid (Set)
what do u guys think?
or just go with the 238/100 hybrids with good tuning? then when if i do rod swap i can go 500?

Those are a good deal, and come from Swamps which I have to like... they are very safe with PMR's, but if you ever want for more, your selling them or getting new parts for them... If you went with a set of 250/100 hybrids you have more room to grow...

IMHO.

ya and the 238/100 hybrids are the same price. but what is the best TS chip tuner person for custom tunes for either set of injectors?

Beans, Tryant, Power Hungry Performance, Swamps... A few others I am forgetting...

If you get your injectors from Swamps, I would go with their tuning as well..