Guages
 

I have a fairly stock 2007 2500... its got deletes and smarty and may have larger stuff coming soon. I wanted to get some gauges before I did anything else. I'm not sure which gauges to get or how many to get to plan for the future. I mean EGT and rail pressure I suppose are a must, boost pressure would be nice, what else would anyone suggest? What are the installation housing options inside the truck? What are some good brands, I'm really trying to get a better idea here.

Does it have an auto? If it does get a trans temp, boost, pyro. IMO you only need a rail pressure gauge if you are highly modded. For that year of truck i really like the Autometer Phantom 2's. They have the option of green back light and are whitefaced to almost match the factory gauges

if its an auto i suggest a four guage pod with boost, pyro, tranny temp, and fuel pressure( lift pump supply pressure) as long as you have more than 8 or 9 lbs under a hard load, your rail pressure will be where it needs to be.

we sell autometer and isspro. :tu:

gotta love the Maxxes they have all the gages built in except fuel pressures.

how does the isspro tranny temp hook up do you have to drill a hole in the pan for the sensor?

i wouldnt put it in the pan, u run the risk of ripping it out :scare2:...put it up on the side so it dont hang down low...just my .02 worth

probably the most accurate reading will be in the pan but there is probably a unused port in there somewhere

i found a kit at diesel manor that splices into the cooling line should work just ain't too excited about cutting the line