Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   6.7L Performance (https://www.dieselbombers.com/6-7l-performance/)
-   -   EGR delete (https://www.dieselbombers.com/6-7l-performance/19804-egr-delete.html)

cdiesel217 01-18-2009 10:25 AM

you can check the date on your door jam to see production date, or you can just unplug it and see what happens. if it gets pissed or goes into limp mode, you have the wrong flash. :argh:

how it works:
exhaust comes through the cooler or bypasses it. they go through two valves which decide which temp exhaust goes into your engine. from there it goes through the tube in front of your engine and over to the valves on top of your intake manifold. if you unplug that, it cant physically work. it is 2 valve seats on a sliding stem, with no power it stays in the shut position. as soon as i unplugged it i saw intake temps just 12F over ambient.

so you could buy block off plates or remove it all together, but unplugging it works just fine haha:U:

powerwagon07 01-18-2009 10:46 AM

Have any of you guys had any experience with the dpf delete kits. Just wondering if it has had any issues in throwing codes, and passing inspection. I live in rural texas so i've never had any truck checked for proper emissions, But first diesel with this crap on it. Also if yall have any info with egr deletes info would be much appreciated.

dirtydog40 01-18-2009 05:15 PM


Originally Posted by Compcowboy (Post 255885)
The studs will work fine. Thats what i am running. If you have a 08 with the latest flash then just unplug the EGR, if you have an older flash then you may have to remove the butterfly valve.

I HAVE THE 08 BUT HOW DO YOU NO IF IT IS THE LATEST FASH? WHAT ABOUT THE BUTTER FLY VALVE AND EGR ASS.? I WHANT TO REMOVE MY STUFF BUT CAN I TAKE IT ALL OFF OF THE TRUCK, I HAVE A EDGE JUICE W/ATTITUDE

---AutoMerged DoublePost---

Ok I looked on the door it was mfg. 12/07 I unpluged the EGR and the engine lite came on so I cleard the code seems to be fine havent driven it yet but the light whent out. I have a Edge Juice W/Attiude. Am I in the safe zone for the block off plates on this truck Is the Question here????:pca1:

cdiesel217 01-18-2009 09:33 PM


Originally Posted by dirtydog40 (Post 272172)
I HAVE THE 08 BUT HOW DO YOU NO IF IT IS THE LATEST FASH? WHAT ABOUT THE BUTTER FLY VALVE AND EGR ASS.? I WHANT TO REMOVE MY STUFF BUT CAN I TAKE IT ALL OFF OF THE TRUCK, I HAVE A EDGE JUICE W/ATTITUDE

---AutoMerged DoublePost---

Ok I looked on the door it was mfg. 12/07 I unpluged the EGR and the engine lite came on so I cleard the code seems to be fine havent driven it yet but the light whent out. I have a Edge Juice W/Attiude. Am I in the safe zone for the block off plates on this truck Is the Question here????:pca1:

i unplugged and blocked my egr. i get a soft code saying either the cooler circuit has failed high or the cooler bypass has failed high. it wont hurt anything

saint056 04-19-2011 08:59 AM


Originally Posted by MRowsh (Post 270533)
Thanks for the information.
I do like this now, this morning I reset the overhead MPG computer and drove 47 miles to work and drove it about 5 MPH over speed limits. I can not believe it, the overhead computer shows 19.9 MPG. It is too hard to believe this. I was getting 14.2 MPG before. So, after I fill her up, I have to drive for few days and do a hand calculation and see if this is really true.


I know the mileage is better and that's expected, but have you had any problems with the inspection stations? I want to do the EGR delete system, but am afraid it won't pass inspection in North Carolina, even with reprogramming the computer.

richb14fish 04-22-2011 11:16 AM

EGR delete/unplug
 
can i unplug the EGR on a fully stock 6.7L 2008 and leave the DPF alone. I think the EGR is causing the turbo to soot up and kick a p2262 code. The milage is down to 12MPG. 4 turbos in 30K.:argh::argh: I have a 5.7L 2011 already picked out, but would rather try to keep this.

---AutoMerged DoublePost---

can you leave the PDF instaled and unplug the EGR?

Diesel Dawgs Performance 04-22-2011 02:36 PM

You need to properly delete the EGR/Cooler

richb14fish 05-08-2011 01:03 PM

EGR delete
 
I have an 08 with the latest flash, Ive removed the butterfly, blocked the EGR and now get a DTC p0106. My tuner hasnt arrived yet. Has anyone had this and will the tuner fix this. PS, it runs like crap now. and the lightning bolt on the dash comes on.

coors_man_2005 05-08-2011 01:18 PM

i did all mine when i had a tuner but your truck is getting threw into limp mode thats why its not running at peak also rich you said something about the turbo plugging up have you thought about running the external filter to keep the oil coming out of the filter and running through your turbo and ending up in your intercooler

Diesel Dawgs Performance 05-08-2011 02:08 PM

Your programmer should fix the issue if It delete the EGR.


All times are GMT -5. The time now is 03:04 PM.


© 2024 MH Sub I, LLC dba Internet Brands