Front end work.
Just had some front end work done. :bat::s::bat: Upper and lower ball joints both sides and a driver side U-joint and break pads. So that got me to thinking are there better aftermarket goodies I should be looking to put on the next time I have to do this and use the thread for others that might be thinking the same way I am. :tu::c:
|
Moog non adjustable on ball joints
Spicer for u-joints Pads dunno yet since I'm still on my stock set with 125k :yeah: |
For the pads I put a set of hawk pads and slotted rotors all the way around in 2008.Still holding up well.
|
passenger side ujoint went out...replaced with napa serviceable joint....and i got 95k on my original brakes
|
agree with red _rattler moog and spicer
|
Well got the work done but now.... the truck feels like shit. The ass feels like it wants to dance out behind me and steering inputs seem wacky. Sometimes a little works then sometimes it takes alot to do the same thing. Is this the death wobble??:argh:
|
sounds like you could have some does it start going crazy when you hit a bump or a rough spot in the road ?? also my truck was caused from the tierod to pitman arm had a little slop so check all your tie rod ends and my buddies truck was caused from a bad bushing on his shock beleive ot or not these things like this can be a pain to find the culprit:s:
|
Found the culprit. Wont believe it.. Tire Pressure.. left was 70 and right was 80 equalized them both at 70 drove like a new truck.
|
cheap fix but the smallest little thing good deal:tu:
|
All times are GMT -5. The time now is 01:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands