Scohee82ram |
06-07-2021 12:18 PM |
107.5 ram 3500 6.7L 6spd 141,000mi I can crank all day long it will not start but with a little shot of ether it will start and run, but it gives me a P1012 code, fuel pump delivery pressure too high, figure out how to watch my live data on my handheld scan tool last night, its making 20 psi while cranking if I use a little either and start it it's making 9,000 to 13000 PSI at idle and goes up if I hit the throttle, I have replaced the fuel pressure sensor and the fuel pressure regulator on Back of the CP3, anybody have any idea on what's going on?
|