i grinded mine off and but truck dynos at 512hp now so i would grind if i was u its free :rocking:

If you don't mind me asking, where did you get the 14mm H/R? Is it a KTA one?

dennyt pin IS 100.00 and usa made from texas and dennis is good people:U:

got to agree:U:.

M&H Pins
 

anyone check out or have a M&H pin??? IMO there better then denny's. I have a M&H 5.

The DennyT Stage II and M&H 5 cones are nearly identical. I have seen both side by side. The only difference is "Alwaysworking" offers different "stages" for his cones. Dennis used to make a Stage I, but everyone wanted the higher performance Stage II, so he discontinued the first one.

Even if there are differences in the cone, they would be so minimal, there would be no difference performance wise.

i went ahead and bought a new power pin and it helped alot but what made the most difference was the govener spring

Yeah that 3200 spring is awesome!

can some 1 send me the link so i can buy the dennt pin?:c:

Here Albert, Drop him an e-mail at dennytperformance@yahoo.com

He will get you set right up! Dennis is a AWESOME stand up guy! Tell him I sent you over from here on DieselBombers!

RSWORDS