Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   5.9L CR Performance (https://www.dieselbombers.com/5-9l-cr-performance/)
-   -   water / meth bad? (https://www.dieselbombers.com/5-9l-cr-performance/83738-water-meth-bad.html)

NadirPoint 09-28-2011 03:53 PM

The last guy I helped with that on here seemed pretty happy with it.

https://www.dieselbombers.com/5-9l-2...-my-setup.html

You run W/M?

vcustoms86 09-28-2011 03:56 PM

Yes on my 6.7.

vcustoms86 09-28-2011 04:01 PM

Good for you. Wasnt talking about you personally. If this gentlemen decides to build one himself, hopefully you can help him out.

NadirPoint 09-28-2011 04:06 PM

That's Odd
 

Originally Posted by vcustoms86 (Post 804090)
Yes on my 6.7.

Apparently you've had this truck maybe 6 months and only post about W/M starting today. Nothing about installing it on the 6.7 either. Methanol has zero hits searching for you. :nope:

Very strange, indeed. :humm:

vcustoms86 09-28-2011 05:51 PM

OK be a big boy and get to your point. Was i supposed to tell you when i add things to my trucks? Am i supposed to post in every thread about something i feel i can help with? I dont know what your problem with me is but either get over it or stop following me. Its really sad you took all that time to stalk me. When i said "if the person has the knowledge to build one", that was not directed at you. If i wanted to say you didnt know what you were talking about, I would of just said it. Dont take things so personal.

Smarty=Cummins 09-28-2011 10:58 PM

Do you guys that have it in your trucks run it all the time or just when you are pulling something. If running it all the time how long does it take to go through a gallon of water meth or washer fuild.

NadirPoint 09-29-2011 07:29 AM

So Here's My Point:
 

Originally Posted by vcustoms86 (Post 804142)
OK be a big boy and get to your point.

My point is you're being a dick (to me) and trying to give people advice about things you don't know anything about. Tell us about that "precision" requirement for water injection you mentioned earlier - I'm all ears....

What goes around comes around. Little boy. :w2:

---AutoMerged DoublePost---


Originally Posted by Smarty=Cummins (Post 804283)
Do you guys that have it in your trucks run it all the time or just when you are pulling something.

When it runs depends on the type system you install and how hard you run the truck. Some systems run lower volumes at less boost, the mileage and towing type systems. So It would be flowing less water more often. OTOH, high power drag trucks might run a gallon or more through the engine in a few seconds on a pass. I set mine to run only on high demand above 17psi boost or so. That makes for a compromise between EGT control and added power when you need it. Maybe you just run water for the EGT control while towing.

Originally Posted by Smarty=Cummins (Post 804283)
If running it all the time how long does it take to go through a gallon of water meth or washer fuild.

That was a mistake I made on my first setup with the 1st Gen - too small a tank. If you are towing with it to keep EGT down you will go through alot of water, so probably need 5 gal tank minimum.

vcustoms86 09-29-2011 10:34 AM


Originally Posted by Smarty=Cummins (Post 804283)
Do you guys that have it in your trucks run it all the time or just when you are pulling something. If running it all the time how long does it take to go through a gallon of water meth or washer fuild.

Im just running the Snow Performance MPG system. Still on my first 5 gallon tank. Only been in a week. :yeah: This system is on all the time. Ill let you know how many miles i get out of the first tank :c:

---AutoMerged DoublePost---

Nadir-
Your the only person on this site that has a problem with me. I used the term "precision" so someone who didnt understand water/meth would begin to see the importance of making sure the right amount and right mix goes in so that the combustion is not quinched. No I didnt build my own. It was easier and faster to just order a kit and put it in. I have too many projects going on plus i just got married and the wife would rather i spend time with her than work on the toys. And you still havent told me what ive been wrong about since "i dont know anything". Stop being a little girl and taking things personal. I told you twice that comment was not directed at you but you fail to understand that. Reach down, grab ahold of whatever is there, man up, and move on. :c:

NadirPoint 09-29-2011 01:14 PM

No Problem
 

Originally Posted by vcustoms86 (Post 804439)
Your the only person on this site that has a problem with me.

See, you're wrong again - I have no problem with you - just helping clarify your position for other posters. For example, when you feel compelled to post advice on subjects with which you lack experience or knowledge: The easy way out when you don't know anything about W/M is to just buy a kit. That's you. Maybe not everybody thinks that way. But we know you do, and that's what you advise, regardless of what you know about W/M, the other poster's requirements, abilities or budget.

Remember me next time you decide to call somebody out being a dick if you don't want any more assistance with clarifying your position to other posters around here.

No problem, glad to help! :tu:

OBTW, your continued references to genitalia, sexual orientation and children makes me wonder. Just sayin' :humm:

vcustoms86 09-29-2011 01:27 PM

Still not telling me what i was wrong about. Thats your statement, "I dont know what im talking about". Prove it. Shut up or prove it. Where was i wrong?

---AutoMerged DoublePost---

[QUOTE=
OBTW, your continued references to genitalia, sexual orientation and children makes me wonder. Just sayin' :humm:[/QUOTE]

Really? What is this high school?


All times are GMT -5. The time now is 07:45 PM.


© 2024 MH Sub I, LLC dba Internet Brands