Need Tech Help
Been browsing Industrial Injections site and have questions before I make any purchases. Am looking to go with 100hp nozzles and wondered if bag o parts will supply enough fuel or should i plan on getting 33% over cp3? Also will be adding lift pump will 95 gph supply that or will I need 150? Plan to use the Thunder 330 turbo. I also found a bottom end girdle and wanted some opinions if that is needed for what i have planed. Thank everyone for your time and appreciate your help and experience.
|
Depends on your power needs,wants! If you plan on staying mild 500-600hp then get 50hp sticks so your milage will not suffer. get a CP-3 and be done with it a bag of parts is good for 20%. The girdle is a waste of money at your power levels and up to 700hp!
|
Anyone else? I take all opinions and input I can get. Thanks. Also wondering if anyone knew where I could find a copy of the book for an edge attitude monitor (the old style not cs or cts)?
Horsepower goals are somewhere between 450-600. Looking for a drivable truck, power to pull gooseneck when I need and still be able to take it to pull at local fairs, maybe not every event but some. Fuel economy is a factor but as long as I get 13-15 or better I dont care. Figuring it by hand I get 22.5 on long highway trips no load and 17.2 when around town with some heavy foot. I am not looking for a smokin rig I prefer to keep the edge, I like its simplicity and ability to turn up and down as needed. Been talking with Goerend for trans and will be installed before any fueling upgrades. |
Originally Posted by dangerous1965
(Post 781043)
Depends on your power needs,wants! If you plan on staying mild 500-600hp then get 50hp sticks so your milage will not suffer. get a CP-3 and be done with it a bag of parts is good for 20%. The girdle is a waste of money at your power levels and up to 700hp!
|
Anyone have opinions on the company industrial injection? Problems?
|
Originally Posted by bullhead
(Post 807657)
Anyone have opinions on the company industrial injection? Problems?
|
I have II injectors, compounds, bag o'parts and dual feed line and everything has been awesome. I have had no problems with anything that I have purchased from them!:c:
|
Re: Need Tech Help
They make very high quality parts.
Luke |
All times are GMT -5. The time now is 04:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands