one of the companys have baffles that fit in the stacks.

I havent done much research on that yet but Im sure I'll need something.

got it on today, ill give you a call toamarrow., its 4 inch going ito the bed.

All that turns it up into the bed is an elbow, as much room as you have before that, you could put whatever muffler you want on it. All I did was do away with the entire stock exhaust except for the downpipe and ran a four inch straight piece all the way back. Granted that I did remove a coupla hangers from the muffler and put it a little lower than where the stock muffler was just to keep everything straight and somewhat level so that the 90 elbow that goes up would allow my tee pipe to fit correctly. Just remember that if you mount one thing wrong, it may throw something else off.--think down the line so to speak. :ok:

mine has the internal mufflers in the stacks.... nowhere near a muffler but it took some of the rasphey(sp) sound away..... it sounded better with them in than it did with them out..... i'd like to put a muffler on mine but sourcing a good flowing, not too quiet with a good tone that is perty cheap is hard to find.....

I could use my AERO. I was amazed on how much it quieted my existing system down

cool!!!!!!!1

those bods words don't go together..... true i'd love to have one.... but funds are the determining factor..... i'm almost willing to do a cheap 4" bullett or a glasspack....

I decided to do it.

here they are

http://www.dodgeforum.com/upfiles/17...5E23EC46FC.jpg

























just kidding some one did a chop for me. LOL

I had the guy redo the chop and make the stacks a little taller

http://www.dodgeforum.com/upfiles/17...E415B2A2E9.jpg

If you do them you should go with black chrome.

Andy