Which turbo wheel ??? Wicked wheel 2 or ..
 

I really want to get one I've seen alot if good things about the wicked wheel 2 but I've also seen others say there are better ones out like batmowheel and riffraffs??? Does anyone no which is the best ?

i have read that batmowheel is not that good of quality, but i personally dont know my self.

Someone needs to do a dyno with different wheels and see who's is actually better

WW2 is impressive on my buddy's 02 psd

I installed very high quality and huge difference from stock wheel

what difference did you and/or he notice?

I heard riff raff makes one that is 6/6 instead of 5/5 that sounds like it would be way faster on spool idk tho someone needs to show some proven results

There's no huge difference it's like putting on an expensive intake yeah there's a little more power but you have to tell people it was a huge difference because the money you spent. I have a ww2 and it is better than stock but you might as well get a new Wastegate and more boost and get a noticeable difference for the same money or save it and put it towards a better turbo

if you have the 305HP engine your turbo is tiny. 54mm or 56mm. I sell billet wheels for often under $200. I would not recommend them for that turbo. Save your money and get a better turbo. a 63/68 with gated housing is $1250 and will support 600HP.

The gtp38 has a poor wheel and most anything is an improvement.

He went from 15psi of boost to 24psi of boost then we put banks big head gate and exhaust and Intake and TS chip and started pulling 28psi of boost so yeah huge difference from stock money well spent and no it's not expensive considering it was 250 bucks and a new turbo is 1400