Drilling a silencer ring
ok so i have heard about drilling holes in your silencer ring will make more noise from the turbo. i am considering attempting it just got to get a minute to try it, has anyone tried this if so any info would be very helpful thanks
|
Can try it without it once, see how you like it. If it's too much, then you can drill some holes. That way, you can tune it to your octave range. :tu:
|
yea i agree. just taking it out would be my best guess because i have it out on my truck and i can only hear my turbo when i really hammer on it or it i am listening for it.
|
X3 just rip it out...
|
thanks for the input. mine is already out i love the sound just curious if it will make it a bit more agressive sounding or not.
|
X4 take the thing out! It takes 5 minutes! if you like turbo noise then you will love it out :tu:
|
taking the ring out will only increase turbo sound in the cab. not out of the tailpipe
|
ok i tried eight 3/16 " holes evenly spaced identicle to the one i saw that gave me the idea it worked but not as well as simply removing it.
|
Just take it all the way out thats going to make the turbo hiss lowder inside the cab as far as making the exhaust more mean turbo sound increase boost pressure which means more air more fuel..
|
^ Wow that logic it WAYYYY OFF. Taking the ring off has no effect on temps, power, or mpg. Just let's more noise escape into the motor bay.
Sent from my iPhone |
All times are GMT -5. The time now is 06:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands