I don't see why they can't. I'm not certain I would as I don't have a picture of the internals but fluid through the pump shouldn't be an issue.
|
No....cant mount the pump at 90*......would not function.
If you have a long bed....the 150 Series will fit with no issue and will not be seen. If you have a short bed...the 95 Series will be a better fit if you are worried about the filters hanging a couple of inches under the bed. |
Originally Posted by Dr. Evil
(Post 100713)
But can they be mounted at 90 degrees?
you can see said weephole in the pics above |
1 Attachment(s)
here is a pic of a 95 mounted where recommended in the upper corner of the bed
|
^^^^ No filters on that one ^^^^
|
Originally Posted by Dr. Evil
(Post 103669)
^^^^ No filters on that one ^^^^
just thought he may wanna see one without filters :sos: beside that this makes me feel useful yaknow |
I think some are a little confused......
The FASS is this: http://www.dieselpp.com/fass-images/500.jpg The HPFP is this: http://i118.photobucket.com/albums/o...1/P1020526.jpg |
Originally Posted by Whitmore
(Post 103672)
ya I know..................I always add useless info huh
|
5 Attachment(s)
heres some of mine that i snapped.....
Attachment 59102 Attachment 59103 Attachment 59104 Attachment 59105 you can see em BARELY hanging down right below my toolbox in this pic. Attachment 59106 |
Thanks for all your help!... I have a shortbed and decided to go with the AirDog, it was the shortest, and it uses over the counter fleetguard filters, which was a requirment and is on sale for 100 bux cheaper. I wanted to run the big filters, but this way will be safer off road, and I will just change the filter more often.... It should be here tommorow...:U:
|
All times are GMT -5. The time now is 10:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands