|
Originally Posted by kerley
(Post 734528)
My truck is 100% oem, and runs fine but I would like better fuel economy without replacing the turbo. What are the best injectors for my needs. I don't drive much but when I do I usually pull my trailer sometimes loaded with 5000lbs. of hay. I'm ready to adjust the valves at 197k and figure I might aswell change injectors while the valve cover is off. Thanks, Kerley
I would check out a set of our RV275's |
Exactly the Jammers supposedly run hot, and Im saying with the box off they were great. Never saw 1300* on a full throttle run.
|
Originally Posted by Headcase98002
(Post 734565)
Exactly the Jammers supposedly run hot, and Im saying with the box off they were great. Never saw 1300* on a full throttle run.
|
Stage 5 Jammer 150hp nozzels. They were extremely smokey, but never hot since I had a true 4" exhausty out of the turbo, with a 3pc manifold and some intake upgrades as well. They do feel a little on the low power side compared to the DAP injectors I have now, The reason I replaced them is cause it idled like crap.
|
i ran jammer 5's on a hy35 for like 5k miles and it never did anything to the turbo, ran fine. I ran those injectors all the way up to my p pump swap and than switched to Firad 200's. They are very hot injectors but not so bad for the money. I would got with something else though
|
| All times are GMT -5. The time now is 10:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands