Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   5.9L 24V Performance (https://www.dieselbombers.com/5-9l-24v-performance/)
-   -   Help! (https://www.dieselbombers.com/5-9l-24v-performance/73449-help.html)

motoxer301 03-30-2011 07:01 PM

Help!
 
Hey Guys need some help on this one.....after my injector install I took it for a ride and everything was fine, until I got back to my house with it and saw coolant leaking pretty bad.....turns out its coming from a small freeze plug in the back left hand side of the motor.....how do I fix this? :argh:

TugBoat 03-30-2011 08:51 PM

POP it out n put new one in

motoxer301 03-30-2011 08:58 PM

do you think it will happen again without having the head o-ringed and all that because of the injectors?

---AutoMerged DoublePost---

i found this pic online, its the same freeze plug that is leaking on my truck....

http://www.laserbytes.com/images/24vleak.jpg

oudive 03-30-2011 09:05 PM

motoxer,

What size injectors did you put in? I would not think that the freeze plug started leaking b/c of injector swap. It may had already started to give and it finally gave up on life. I would swap it out with a new one and keep an eye on it. Good luck on it and I hope that once you swap it out, it is good to go and you can enjoy your new injectors.

oudive

motoxer301 03-30-2011 09:51 PM

oudive,

I put 150hp injectors in it....i never had a problem with coolant leaking in the past....i took it out for a ride as soon as they were done to see the difference they made and as soon as I got back there was a large puddle of coolant under the truck.....it sucks because its almost impossible to get at being in the very back.....in my head i keep thinking the injectors had something to do with it

TugBoat 03-31-2011 08:12 AM

Like oudive said it was prob on way out. Any that extra lil beating u gave it pushed it out. Clean it up nice n smash a new one in. It's tight but can be done.

motoxer301 03-31-2011 01:38 PM

Do you think I should have the head o-ringed and get head studs?

TugBoat 03-31-2011 09:47 PM

If you plan to do some upgrades yea, can't hurt the truck.... only ur pockets lol

motoxer301 04-01-2011 07:52 AM

I do plan on upgrading the turbo, maybe stacking an edge comp box with my smarty but that's it.....I did get a price on getting the head o-ringed and getting head studs.....quite expensive, good thing I was sitting down :scare2:

RAW 04-01-2011 07:55 AM

A set of studs alone will go a long way. That's all I'm planning to do on my truck. I also have a set of 150's sitting beside me that will go in at the same time.


All times are GMT -5. The time now is 05:03 AM.


© 2024 MH Sub I, LLC dba Internet Brands