SCT also does GM Gas burners....

yeah. i wasn't sure what or if SCT had anything for the Dodge.
Some other comperable programmer would be what?

smarty for the dodge... but that's no comparison..... Smarty>SCT

Im surprised no one has come up with this yet

UNPLUG THE MAP SENSOR!!! it will make it alil groggy till you get a box on it but it will smoke. Id say just do it right and bomb it but this will get you some smoke.

Wont work, you have to have some kind of readings off of the Map. Mine did all kinds of wierd things when I tryed it. I have my comp hooked as an EZ and it will blow a nice cloud on take off with the map unplugged but comp hooked up.

Andy

yea with out the map sensor plugged in the truck will only build 10lbs boost and be slow. the only way this works is if you have a box on it such as the ez or a comp. mine has been unplugged all winter with my comp puts a nice cloud out as you have seen zack i want me some injectors to get my real smoke.
:f:

like I said it will be slow but will smoke like he wants and it wont hurt anything, then onece he gets a box it will be back to normal response.

Mine never smoked when I did that. Set off every light on my dash, and transmission would not shift into OD with it unpluged. Pluged it back in and all the problems went away. I never saw a puff of smoke with it unplugged on a stock truck.

un plug the map sensor and it will smoke, i didnt lose any power the one time i did it.

AGAIN...if you do not have a comp box, or ez or other similar power adding box that plugs into the map sensor it WILL NOT smoke with the sensor unplugged.

with the sensor unplugged and no aftermarket box there the truck will not fuel at all...the ECM sees no boost and will not allow the VP44 to inject any fuel. thats why the truck is slow and wont spool past 10psi.