Oil Pressure Guage
I am ordering some new guages and I have an important question.
I want to install a new Motor Oil Pressure Guage in my 1998.5 Dodge Cummins, but I also want continue the use of the factory guage. How and where would I attach the new guage into the oil pressure system? Thanks, Kerley |
theres a secondary oil feed on the top of ur oil filter housing thats 1/8 thread thats what i hooked mine up to but youll have to run tubing from the oil feed to ur sending unit because heater lines run to close to the feed I'll see if i can find a pic of how i did mine
|
Originally Posted by 24vcumminscowboy
(Post 634721)
theres a secondary oil feed on the top of ur oil filter housing thats 1/8 thread thats what i hooked mine up to but youll have to run tubing from the oil feed to ur sending unit because heater lines run to close to the feed I'll see if i can find a pic of how i did mine
|
6 Attachment(s)
Sorry it took so long i had to wait for rain to clear out but hopfully this will give you an idea there not the best pics
|
3 Attachment(s)
That copper tubing will eventually break from the vibration.
Heres my setup. I run the oil right into the cab through braided SS 1/4" line: Attachment 44793 Attachment 44794 Attachment 44795 |
Originally Posted by 24vcumminscowboy
(Post 634935)
Sorry it took so long i had to wait for rain to clear out but hopfully this will give you an idea there not the best pics
|
its an auto meter ultra lite thats what all my gauges are
|
All times are GMT -5. The time now is 12:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands