Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   5.9L 24V Performance (https://www.dieselbombers.com/5-9l-24v-performance/)
-   -   EGT how hot is too hot? (https://www.dieselbombers.com/5-9l-24v-performance/54933-egt-how-hot-too-hot.html)

tburke 07-21-2010 06:00 PM

EGT how hot is too hot?
 
Just installed Raptor 150 and draw straw so now fuel pressure is not an issue and I can open up the throttle if I want. If I get on it real hard with my edge on 5 my EGT gets up to over 1500. I back out of it when it hits 1500, my question is how hot is too hot?

bobcat67 07-21-2010 06:01 PM

from what i've heard 1200 is as high as you want to push that turbo, but it's up to you 1500 for a couple seconds probably won't hurt anything

tburke 07-21-2010 06:16 PM

OK, I was thinking that 1500 was probably too hot. I guess I'll set my alert at 1200 and keep it safe. Thanks Bobcat.

bobcat67 07-21-2010 06:39 PM

yep, i could be wrong but i've heard 1200 is where you should calm down, and 1350 on common rails with stock turbo's so everyone is different

RAW 07-21-2010 06:41 PM

I can't see your signature as I am on my Blackberry, what turbo are you running?

bobcat67 07-21-2010 07:17 PM


Originally Posted by RAWilliams (Post 592904)
I can't see your signature as I am on my Blackberry, what turbo are you running?

I'm assuming stock being as it doesn't mention turbo in his signature

angelic0- 07-21-2010 07:19 PM

being that i fried the rings on my Dmax @ 1500° i don't recommend it... but i bet the 6BT is stronger than a LLY :)

tburke 07-21-2010 08:16 PM

Yeh, I'm just runnin the stock turbo

RAW 07-21-2010 08:39 PM

An HY35, that has a a wastegate with NO hose running to it? If so, plug that bugger OFF! I did that for many months and never did any damage to the turbo, and was able to reduce m EGT's by 400 degrees. With it plugged, and making 30 PSI I never went over 1100 EGT's, before my injector upgrades. With the wastegate active and set to 18 PSI, I easily hit 1500 EGT's.
It is a little tricky to plug off a wastegate that it a metal tube, but is possible. I took a machine screw, 10-24 size, and thread it into the tube that inters the compressor housing. After it was in there, I used a bench grinder to reduce the size of the head so it can fit back into the compressor housing. Worked like a damn, that's for sure. I sold that turbo to a buddy I used to work with 6 months ago, and it is still working 100%. Granted I did remove the plug before I sold it.

Best of luck, let me know if you need any more info.

4 cummins power 07-21-2010 08:44 PM

you can run 1300* all day long and 1400-1450* for short bursts on these cummins engines much over that and will start melting things down so i would say 1500 is too hot


All times are GMT -5. The time now is 07:42 PM.


© 2024 MH Sub I, LLC dba Internet Brands