how much smoke is a bad thing?
I just put in some + 50hp injectors from pensacola diesel and now I blow thick black smoke at anything more than 1/4 throttle. also when I get to 70mph, and start to get past 2000rpm, it starts to cut out like it not getting fuel or something. I have a new vp44, and an airdog 100 with clean filters and a dummy light that comes on at under 10 psi(its the only pressure switch I could find that was close to what I needed). Also, I was really hoping that my new injectors would get me past that 12.8 mpg that I have been getting since even before the ip was changed. Any suggestions?:argh:
|
How about the filter on the engine block, or is it by passed? Engine air filter clean? Try running without the filter, but only for a short stint to see if that is the problem.
No programmer of any type? I put +50 HP nozzles into my '01 and everything became better. I have no smoke on stock mode. |
Many people have been quite disappointed with Pensacola diesel products.
|
Stock filter is non existant, I will try cleaning my air filter.
|
injectors from pensacola diesel are made purely from china...
|
Originally Posted by Codgedodger
(Post 494691)
injectors from pensacola diesel are made purely from china...
|
i dont get it i have 65 hp injectors and my truck hardly smokes i dont get it?
|
I almost bought from them but I read lots of reviews just like yours so I got some EDMs from lukes diesel here for almost the same price and it barely smokes at all with lots of good power
|
i have 100HP sticks in my truck and they run clear as he:: no problems at all even improved fuel millage so like stated above check the filters and stuff
---AutoMerged DoublePost---
Originally Posted by 98dodgecummins
(Post 494767)
i dont get it i have 65 hp injectors and my truck hardly smokes i dont get it?
|
that is what I was thinking. I think I am going to make pensacola send me some different ones or my money back. I am not very happy with the current result. I had good luck with my psd injectors from them, and my vp44 works fine, so I thought, well... you know what I would have thought.
|
Originally Posted by Codgedodger
(Post 494691)
injectors from pensacola diesel are made purely from china...
|
Originally Posted by crazycooter
(Post 494473)
I just put in some + 50hp injectors from pensacola diesel and now I blow thick black smoke at anything more than 1/4 throttle. also when I get to 70mph, and start to get past 2000rpm, it starts to cut out like it not getting fuel or something. I have a new vp44, and an airdog 100 with clean filters and a dummy light that comes on at under 10 psi(its the only pressure switch I could find that was close to what I needed). Also, I was really hoping that my new injectors would get me past that 12.8 mpg that I have been getting since even before the ip was changed. Any suggestions?:argh:
|
Ask 2500heavyduty about his PD Injectors for his Dmax.
|
injectors
PD injectors are by far the cheapest you can find. most of the ebay sellers just replace the nozzles on them and have very poor flow and can really mess with your truck and mind. i live up in PA and had a set of 100 horse injectors made at Wimer's Diesel. they bosch marine injectors that have had some lift cut on em. with my tst comp box off it barely smokes even when gettin on it. if you are looking for a good set i would try them guys out
|
turns out there was nothing wrong with injectors... Put a boost gauge on her, and could only pump about 5psi:ouch: got to looking, and realized that I forgot to tighten the clamp on the rubber air tube on the high ram. hooked her up and now she screams. clear exhaust and 20+ mpg.
|
That would do it
|
oops, happens to all of us:tu:
|
Well thats good glad you got er going again and didnt have to pull injectors back out again :yeah:
|
Might not be a bad idea to check the whole system:
https://www.dieselbombers.com/24-val...ke-system.html |
i did the same thing hahahaha.
|
All times are GMT -5. The time now is 05:47 AM. |
© 2024 MH Sub I, LLC dba Internet Brands