B.D injector nozzle's??
 

good or bad?. i just orderd the 150h.p B.D injector nozzles for my 24 valve. i have smarty, juice with attitude, intake. fuel system. exaust. stock turbo:argh: how do you guys think my 'egts' will be with this setup? im planning on a turbo soon :jump: need some help on that to? any sugestions??

i was looking at the super B. sounds solid. im not to sure.

thanks for the help:tu:

Never seens any nozzles from BD. Ive only seen full injectors.

On a stock turbo your goin run pretty hot but if you keep the smarty and juice on a lower setting you should be alright. Your just gonna have to drive by your egts till you can get the new turbo. Just my .02

DEFFINETLY!! with my turbo and my chip on level 3 i can hit 1200 degrees in no time.. just be easy on it, dont blow your head off, and enjoy the smoke show! :choochoo:

you will want to make sure that whoever puts the tips on that they pop test them to make sure theyre all about the same.. other wise it will run really rough.

when you get these leave your box off, or your going to melt something. 110's and a stock turbo get hot quick.

thanks for the info. right now with my setup. i cant even hit 1200. so i know il be up there. i dont wanna run my egts over 1400.
any sugestions on a turbo?:tu:

---AutoMerged DoublePost---

will it be alot more smoke with these? i know itl be alot. but if its to much a new turbo and maybe some propane should help clean it up rite??:humm:

Ya these injectors will really smoke. From the write up on them they are no more than the Old Edge Jammers. With the right setup they will make good power but there just a dirty injector.

$250 for nozzles? I just paid $350 for a new set of 7x.012 injectors.:humm:

Come on Jamie, you know what you got for $350. Next time ask Jon how much just the nozzles are, when he says $300-350, you'll understand how much time he puts into them.