silencer ring?
I have heard of people taking a "silencer ring" out of the turbo for more noise. I was wondering if this is possible, and if so how do you do it?
|
take air inlet off turbo, then use a small screw driver to pry up one ear on snap ring while working a curved pick or another screw driver behind snap ring once it strats to come out it will come pretty easy the hard part is getting it started. dont get in a hurry turbos are expensive.. After snap ring is out the tin plate will almost fall out:tttt:
|
Originally Posted by Sawman
(Post 462039)
take air inlet off turbo, then use a small screw driver to pry up one ear on snap ring while working a curved pick or another screw driver behind snap ring once it strats to come out it will come pretty easy the hard part is getting it started. dont get in a hurry turbos are expensive.. After snap ring is out the tin plate will almost fall out:tttt:
|
Would a small screwdriver work better or a regular size screwdriver? Just wondering thanks ahead of time?
|
Small is better....not much room to get under the snapring in that groove':tu:
|
screams like a jet
|
Originally Posted by 1st genny nut
(Post 462254)
screams like a jet
|
i took mine out a while back, it really makes a diff on the in cab sound. i think there is a video on youtube that shows how to take it out.
|
now your truck will sound like a city bus:rocking:
|
I've heard removing the ring is good for 5 HP.:moon:
|
All times are GMT -5. The time now is 08:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands