- - AD 150 install
(https://www.dieselbombers.com/5-9l-24v-performance/33510-ad-150-install.html)
dmac
10-10-2009 07:45 AM
what about fuel heater
Diesel Dawgs Performance
10-10-2009 02:49 PM
dont need a fuel heater unless you live way way way up north.
dmac
10-21-2009 10:20 PM
ok got airdog installed had 15 psi fuel pressure shut truck off installed stelth plate now have only 4 to 6 psi put old pump cover back on now 6 to 8 psi please HELP
dukeboy_318
10-23-2009 09:32 AM
Originally Posted by dmac
(Post 408473)
what about fuel heater
if you want to run with the factory fuel heater, you can do the following, take your factory filter and using a hack saw, cut off the filter element about a 1/4 inch from the seal, make sure the gasket is good and bolt it back in, then run you fuel line that comes from your airdog into the filter assembly and youll be good, we did this to a truck a while back, works great theres a similar write up around here some where.
Diesel Dawgs Performance
10-23-2009 01:16 PM
Sounds like a leak in the system if your pressure dropped that much.
mysterync
10-23-2009 02:03 PM
Nope, Thats what I was talkin to ya about yesterday luke. It was a issue with the high flow module. Think we've got it solved now!
dmac
11-29-2009 05:38 PM
sorry it's been so long since last post when not working hunting got problem solved will wright it up and post pics verry soon. It was a problem with high flow module.
---AutoMerged DoublePost---
