Diesel Bombers - FP gauge install questions

Page 2 of 2

Show 40 post(s) from this thread on one page

Diesel Bombers (https://www.dieselbombers.com/)

- 5.9L 24V Performance (https://www.dieselbombers.com/5-9l-24v-performance/)

- - FP gauge install questions (https://www.dieselbombers.com/5-9l-24v-performance/28519-fp-gauge-install-questions.html)

Fishin2Deep4U

07-03-2009 02:39 AM

Quote:

Originally Posted by 24v'd_Fury (Post 359273)

I have an airdog 150 and have the tapped quick connect line from the VP, your saying dont use the isolator? What about pressure spikes?
I have a small plastic hose with my kit with compression fittings on each side and from the guage through the firewall I have a thick rubber hose that the kit came with, should I just run the plastic line from the VP directly to the black hose to the guage?
Thanks

Not recommended. The VP will kill the gauge.

Dave

Dr. Evil

07-03-2009 10:49 AM

Quote:

Originally Posted by 24v'd_Fury (Post 359273)

I have an airdog 150 and have the tapped quick connect line from the VP, your saying dont use the isolator? What about pressure spikes?

Thats what the needle valve is for. It dampens the pressure spikes and saves the guage. Isolators just cause problems and inaccurate readings.

24v'd_Fury

07-04-2009 01:37 AM

Do you know where I can get the needle valve?
I dont wanna kill the guage but its driving me nuts having it light up and look nice yet not working.:argh:

All times are GMT -5. The time now is 08:11 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page