Performance Clutch
 

my step dads 01... he got his performace clutch put in and it dosent seem to engage all the way... and you have to kill it to put it in reverse.. but he can't remeber the brand or the horses its made for... but any help or suggestions is appreciated

Check his Hydraulics

Many of the stronger aftermarket clutches (especially dual discs) with higher plate loads need upgraded hydraulics to work properly.

Does he have a South Bend or Valair?

singles dont, duals do i have a single and its the stock hydros its the biggest single clutch kit valair makes

Singles normally don't - but they can.

Is the topic your truck or step dad's?

If the clutch operation in question is from Valair, just give Dan a call - he's very helpful. :U:

it my step dads truck but ill run the two brands you told me by him and see if they ring a bell, thanks for the help ill let yall know if we get it to working right

If you have weak Hydro's even adding just a Single Disc Clutch can make you have to replace them with a new set or upgraded set.

he siad a south bend sounds familiar... and he said that when they put it in wich was about 6 mounths ago (he just hasnt been driving it hes been useing my moms truck) he put new hydros in it, but he said that upgrading them might fix it

---AutoMerged DoublePost---

he also said that he replaced his master cylinder and slave cylinder if thats what yall mean by hydros and were can we get some upgraded hydros

master/slave cylinders are referred to as hydraulics or hydros

Hey guys well we got some upgraded hydros and put them on but they didnt fix the problem:madd::humm::humm:... if you have any other suggestions they would be greatly appreciated