Diesel Bombers - AirDog? FASS? MITUSA?

Page 3 of 6

Last »

Show 40 post(s) from this thread on one page

Diesel Bombers (https://www.dieselbombers.com/)

- 5.9L 24V Performance (https://www.dieselbombers.com/5-9l-24v-performance/)

- - AirDog? FASS? MITUSA? (https://www.dieselbombers.com/5-9l-24v-performance/23947-airdog-fass-mitusa.html)

nosparkCummins

03-20-2009 02:00 PM

Quote:

Originally Posted by stkdram55 (Post 308800)

your workin on borrowed time at 7 psi get that thing fixed quick or your gonna be buying a new IP:argh:

I only drove it around the block today to see if the filter helped. I'm using my parents truck as a daily driver for right now

Mr.Krabs

03-28-2009 03:25 PM

Quote:

Originally Posted by Fishin2Deep4U (Post 308172)

The original diesel belt drive is the RASP by DTT. But all the pumps have the same issue, they wear in the front bushing causing leaks eventually. This is why I did not go that way. I have seen a much better design, but it just has not seen the light of day yet.

I am running a 12V mechanical pump, but any setup that requires or could require the use of 2 pumps seems silly to me. Why buy an aftermarket pump if you have to rely on the stocker for any use??

Just my thoughts.

Dave

That's funny,I've got a pile of miles on my belt drive and never had a leak yet,about 250k on it I guess.
I think most people get the belt too dang tight.

dirtyOl'B

04-02-2009 09:00 PM

Had a fass for about three years worked fine till on day the motor on it just quit. Called them about the warranty and some how they miss placed my info for it. got a holly blue and a inline filter now for about $150 18 psi and plenty ov volume.

nosparkCummins

04-15-2009 12:19 AM

Just an update. I got ahold of Opie when he was out of town on a job. He said about mid April. well... I got ahold of him he's setting me up with a MITUSA pump. Its substantially less than the Airdog, and he is going to deliver and help me install it. He's pretty stand up guy if you ask me

Uncle Bubba

04-15-2009 12:59 AM

Quote:

Originally Posted by nosparkCummins (Post 323934)

Can't ask for better then that.:U::c: Now if we could just get him to be a vendor on here and active on the site.

nosparkCummins

04-18-2009 02:44 PM

Well Opie came down this morning and Helped me put the MITUSA in and all I can say is WOW its so simple. Drove the truck and now my problem is its too easy to hit the de-fueling spot. Guess its time for a box:5::rocking:

Oh BTW it make 17psi at idle and doesn't go any lower:choochoo::U::c:

stkdram55

04-18-2009 02:46 PM

:U:

Uncle Bubba

04-18-2009 03:33 PM

Quote:

Originally Posted by nosparkCummins (Post 325555)

That's the best part of these pumps. As opposed to a normal electric motor pump that is at it's highest psi at idle, where you need it the least. These belt drive pumps are at their lowest psi at idle and go higher as the truck RPM's climb, giving the extra psi when you need it most under load.

Opie	04-19-2009 04:37 AM

Quote:

Originally Posted by Fishin2Deep4U (Post 308245)

The story is told differently on the other end. But it's neither here nor there. They all have the same design.

Dave

Please fill us in on the other end then. This story is can be right here and now. IMHO Your going to get caught in yet another lie again Dave.

Uncle Bubba

04-19-2009 04:42 AM

Hey Opie, glad to see ya here for first hand info. It's hard to get new ideas excepted out here in the real world and we need some first hand info to spread the word on these pumps. greatest hidden improvement out there for our trucks as far as I'm concerned but we need some help to get the idea excepted.

Again thanks for comin by, hope ya make it a habit.:c:

All times are GMT -5. The time now is 03:54 AM.

Page 3 of 6

Last »

Show 40 post(s) from this thread on one page