Try downloading the Comp File and go to Change Parameters on the Pulse and make sure you have the factory tune loaded. :pca1:

UUMMM the DYNO tune wasn't meant for the street, and has been known for the engine to Die after WOT. Try one of the comp tunes.

I talked to quad and they said that it is the 4k files. They said that they have a tendency to shut off some guys trucks while running fine on others. I just changed to the dyno2 file and so far it has only done it once. I actually don't use the factory tunes. I have some very heavy custom tunes that I run usually.

Mine will do it too. For some odd reason when you Lift after a WOT run the ADR shuts the Lift Pump off. I'm running the New Comp tune(not the 4k) and it does it to me when I drop the CAN and TPS fueling down to 20% or less. Hasn't done it to me since I raised the numbers a little. It didn't start doing it for me until I loaded the new comp tune. I think I'll go back to the older one.