Uncle Bubba |
08-01-2008 08:36 PM |
Got this thing installed today. I also pulled the headlights out and cleaned them off. I used a buffer with some swirl remover to polish the yellowing and haze off the lens's and they came out much clearer when I was done. Now that it's all installed I have to say that for the money and the hour it took to install the harness and clean the lens's it makes a very noticeable improvement.
When I first turned the lights on I had the passenger side way dimmer then the drivers side. Had to ponder that for a few minutes till we figure out that we didn't have the ground wire hooked up on the passenger side. That was the toughest part of the install. A very simple little operation that I would reccommend for anybody still havin headlight problems.
Doc, don't know why you didn't have enough wire unless they have changed somethin. There was plenty to spare on mine.
|