TheMacster |
03-20-2015 07:35 PM |
Do head studs need to be re-torqued with O-rings
So, my truck has been down at a local shop for a while, and since I was out of town for work I wasn't in a rush to get it back. It all started when the clutch grenaded. Went with the SB DD, then got a deal om some parts so I stepped my 150 sticks up to 250's and replaced the HX35/40 with a BD super B special charger. Since I already lifted the head I got the ARP 425s and had the head O-ringed. Here is the issue, when I got it back I went to pick up my gf at work and by the time I got there the head gasket was blown, not just lefted, blown like leaking coolant. Its back at the shop now and they are taking care of it, but since my head is O-ringed do the ARP studs require a re-torque? I called ARP but all they could tell me was that on a stock head they don't and wouldn't say anything about if it was O-ringed, almost like he didn't know what I was talking about, seemed like a SBC wingnut. I have heard mixed opinions, so do I need to re-torque them and if so when and how much. Thanks.
|