600 hp starting from stock
Hey guys just got my 24 valve about a month ago, it was an ugly beat up farm truck but low miles so I figured okay why not, anyways all I've done is visuals, previous owner straightpiped stock exhaust, I recently started workin at an oil refinery so money isn't really an issue but I still don't wanna get too crazy but I know it'll take some good $$$. Any suggestions to start??
|
comp box or edge, injectors, exhaust, bigger turbo
|
you can pull good horse from a high setting on a programmer but it wont last as long. you want some 150HP injectors, lift pump, smarty S-03, intake, 5 inch turbo back, intake manifold (probably banks), good intercooler, water/meth. injection, maybe a cam
|
550HP
get 7x.010 SAC and 63/68/.80 with head studs--- well under $2000 transmission and lift pump will be needed |
Jkidd I am completely new to cummins I've done work on a lot of gas motors but I don't understand the numbers. Could u clarify what a 7x.010 SAC and a 63/68.80 is? May sound dumb but only dumb question is one not asked
|
7x.010 sac is about 175-190HP, 63mm turbo will support about 550HP
|
All times are GMT -5. The time now is 05:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands