fp gauge question
 

I have a ev2 gauge for my 01 2500

I have searched and am still confused on if i need a banjo bolt, a snubber or both?

Thanks

Sam

---AutoMerged DoublePost---

12MM Banjo Snubber - '98.5-'09 Dodge Turbo Diesel-Geno's Garage

would this be the correct part?

Depends on where your putting the sender, if you locate it right at the vp yes you will need a 12 mm banjo snubber.. Some guys use the banjo bolt with a grease hose to get the sender away from the vibration of the pump, I had a grease line swell shut and cut off all fuel on one of my trucks so I don't use that setup(just my preference).. I did away with all banjo bolts on mine with 3/8 line all the way from the tank used a 3/8 tee with 1/8 npt and connected between the stock filter and the vp

great thanks ordered parts today!

You bet.. Good luck!