Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   5.9L 24V Performance (https://www.dieselbombers.com/5-9l-24v-performance/)
-   -   P-Pumping a 24V Cummins (https://www.dieselbombers.com/5-9l-24v-performance/105019-p-pumping-24v-cummins.html)

scottmorgan 11-09-2012 02:33 PM

P-Pumping a 24V Cummins
 
i cummins is dieing... have the code 1683 meaning no comunication between the Pump and the Ecm... no knowing how to fix this i just kept driving my truck... my truck barly runs now... i don't know how to fix this but i do know if i replace the pump and its the computer i'll be pissed and just back words so i am thinking of running the old p-pump this way i know i'll fix the problem! anyone have any ideas on this or some good post for me to read that would be great... or maybe a way to diagnos my truck to tell what is broke...

---AutoMerged DoublePost---

if i could get some quotes on some convertion kits as well that would be great

Farmboy 2.0 11-09-2012 03:33 PM

Id say your vp and lift pump are dead. Your can fix that for around 1550 with a new vp and a fass or airdog 150. However if you want to a p-pump swap your looking over 3k in just parts. But P1683 is a speed control code. Did you mean 1688?

RollinCoal99 11-10-2012 11:36 AM

you can get a 215hp p pump from merchant automotive remanufactured for $400, Crazy carls.com has entire kit with out the pump for $1700

cummins270 11-10-2012 09:46 PM

I thought merchant only did duramax parts?

scottmorgan 11-11-2012 12:14 PM

sorry the codes i have are
1693 ecm code
1689 no comunication betweem pump and ecm
0237 low boost(vgt turbo is stuck all the way open)
to further this when i drive my truck will not build past 1400 rmp... if i clear the codes my truck runs great. intill the code come back. i thought that it would be my injection pump, but if it were i would think when i cleared the codes it would still run like shit.. however that is not the case. when i clear the codes my truck runs great with full power. then the codes come back and it will barly idel. it sputters arund trying to keep itsself alive. and when i go down the road i have no power and the rpm stop at 1400.. any suggtions? is it a bad ecm? or a bad ground somewere?

scottmorgan 11-12-2012 04:04 PM

good news i fixed the problem. i had a pig tail from fleece for my vgt controler pluged into my data link. on the back side of the pgi tail was my adrenaline and my vgt controler. i have removed the vgt controler and the truck run great again with no codes. no i just hope fleece will help me out with there product.


All times are GMT -5. The time now is 11:57 AM.


© 2024 MH Sub I, LLC dba Internet Brands