New toys
4 Attachment(s)
Well got some new parts in for the truck this week. It's at troys getting the work done since I'm away for work.
Upgraded from a gt4294 t6 1.15 to a gt4202 t4 1.01. Attachment 41170 Also got the new header I got from polydyne (turbo exhaust housing and header are ceramic coated with his tx7) with my 44mm percision gate. Attachment 41171 The manual vb has been installed and will be hooked up to the cheetah shifter and I'll be installing the new seats asap. Attachment 41172 Attachment 41173 Can't wait to get back to the track with this thing. A huge thank you to Troy for all the help. Feel free to add any pics bud:tu: |
Weak! SO SO WEAK! I want video!
|
Awesome man. Lovin the header. That is a beautifull thing!!:choochoo:
|
I agree about the header. I dont think I have ever seen one like that... I like it though :rocking:
|
It will be the first one of this design to go on a truck so I hope it fits lol.:pca1:
|
:jump:
|
That header is a nice looking piece of art work!:rocking:
|
das boost
|
Originally Posted by Lostnwalmart
(Post 769263)
It will be the first one of this design to go on a truck so I hope it fits lol.:pca1:
|
2 Attachment(s)
Originally Posted by 1AMatt
(Post 770229)
Ahhh I see... did ya try and put it on over the weekend? If so hows she fit??
Attachment 41108 Got the manual vb and shifter in also. We will be building a center console in the next few weeks. Attachment 41109 Now I'm just waiting on my dampener.:jump: |
Im telling you, I know all that is diesel and the more things you keep doing to it, the better my 12.45 is looking! SO get this thing to the track yo!
|
Originally Posted by BRE
(Post 770925)
Im telling you, I know all that is diesel and the more things you keep doing to it, the better my 12.45 is looking! SO get this thing to the track yo!
|
haha thanks guys im hopeing for 11's but we will see:pca1:
|
Wow that thing looks BEAUTIFUL in there. Keep us posted when you bring her to the track :tu:
|
I'll be there in 24 hours!:jump:
|
Dave we were both wrong! Sorry for the bad luck Cliff
|
Originally Posted by BRE
(Post 772818)
Dave we were both wrong! Sorry for the bad luck Cliff
|
:jump: im still faster!!
KACHOW! |
Danny your tuck is much slower right now lol. And I kill to with a roll race :pca1:
|
New line ordered, 3.54 gears, and front end rebuild.
|
Originally Posted by Lostnwalmart
(Post 776777)
New line ordered, 3.54 gears, and front end rebuild.
|
Hmm good point I'll cancel that order asap
|
Originally Posted by 94 12valve
(Post 776785)
? why on a 1/4 mile pass its only on the ground for an 1/8th :tu:
|
That header looks awesome! Where did you get it?
|
Originally Posted by South Tx Coal Roller
(Post 782601)
That header looks awesome! Where did you get it?
|
actualy it hurt my spool up but the top end came alive, got a higher stall converter and will be putting that in once i get the motivation :argh:
http://i305.photobucket.com/albums/n...6/316d545d.jpg |
how much would it cost to make another? or where did u buy it? would there be enough room for a s300 over ht4b
|
I bought it from polydyne in Houston tx. It's made by blown away enterprises that the peer of poly dyne has his fingers in. I would get a stainless manifold though and not one of these.
|
i really dont want to spend 450 for a manifold 3 piece or not you know?
|
Then you really really dont want this one lol
|
Steed speed's manifold gets my vote over the stainless peice
|
Can't go wrong with either IMO :c:
|
i just dont see spendin alot of money on a manifild lol
|
Originally Posted by blazier18
(Post 784721)
i just dont see spendin alot of money on a manifild lol
|
im about to have that much in a motor and 5 speed manual tranny when i get out of boot camp. i just dont see loosin 50 degrees of heat and maybe a second more spool up worth 450$ now if it dropped them 150 or more and gained 15 hp and spooled alot quicker id give it more thought.
|
Originally Posted by blazier18
(Post 785081)
im about to have that much in a motor and 5 speed manual tranny when i get out of boot camp. i just dont see loosin 50 degrees of heat and maybe a second more spool up worth 450$ now if it dropped them 150 or more and gained 15 hp and spooled alot quicker id give it more thought.
|
CNC machined vs cast iron?
|
i understand there better quality i just dont see the price equaling gain in hp wise or egts
|
Originally Posted by South Tx Coal Roller
(Post 785259)
CNC machined vs cast iron?
yep |
Haha that is a drop in the bucket price vrs gain IMO but to each their own. :pca1:
|
All times are GMT -5. The time now is 04:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands