injectors
 

what would be the smallest set of injectors one could run with a super phat shaft industrial injection turbo 62/71/14

160hp injectors from a 94 or 95

wouldnt be enough fuel with stock injectors to spool a super phat shaft

5x12

i have a regular phat shaft 62 with 5x14's. a super phat shaft is bigger than that so i would have to say 5x.014's on the bigger turbo. im sure 5.012's could do ok but id go with a lil more injector on the bigger turbo

160s would do it and they would be the smallest you could use which is what you asked.

im trying to cool this puppy down for towing i dont think the industrial injection 370's are the coolest injector made

No doubt... I'd look for SDX or similar, which are better suited to street and towing use, with the proper spray angle and tested pop and spray patterns.

well the industrial injections are the correct spry angle not for the amrine pistons all ready talked to industrial injection about it. anything to cool my egts down

Industrials are based off a marine nozzle. Just sayin.

snow performance possibly would cool you down

remove the 191's and put in the 181's and tune more with the fuel plate. the 191's just fuel too hard down low for my likings.... especially with 370's

i have ddp 75 horse stick lighting my htt 64/71/14 and it runns cool:tu:

i have seen 215s run a jammer turbo which has a 14cm3 exhaust no idea how cool it ran but no prob spooling it

get some SDX injectors.......either 5x.012 or 5x.014.

Give them a shout and tell them your current setup, what you want, and how you drive (i.e. DD, towing, etc)

go sdx brandon, you wont be sorry, i just got there 5x14s a few weeks ago and love them, but for the towing you do, and the effects you want to accomplish, id go 5x12s, i think the 5x14s are pretty hot. id ditch them 191s for 181s. ill text ya

x2............