a 5x.014 and 5x.016 are injector sizes. the 5 is how many holes, the .104 or .016 are the size of the holes :tu:

a 5x.014 are supposed to be around a 140 hp injector, depending on how it is set up hope this helps. :tu:


also, im running there 5x.014 with the stock hx 35 and they are way to hot for that with a 0 plate. 5x.014 fuel enough to spool a set of twins, as long as there not a real big set. the questionis, what will be is what u plan on doing with it.

i'm not going to go to crazy with it i just want it to be faster than it is now. but since i have to replace injectors i figure i might as well go a lil bigger now instead of regretting it later. and my twins probably won't be too big. i've got 100 plate in mine now with the stock hx35.

if ur not wanting to race or go crazy, id say go with the 5x.014 injectors.

i'll probably be racing but i'll be pulling alot 2. and my loads are usually pretty heavy so i think that'd prob be the best then?

For a hot street truck I think there is no better coice than a 5x.014

ya, since u will be pulling a heavier load, the 5x.014 with the set of twins should be a decent combo :rocking:

i guess i'll start saving my money and get them. thank you for the info:tu:

no man

How many horse is the SDX 1? How many miles are stock injectors good for?

@zach west, keep in mind that the 5x.014s may be a little hot while towing. imo
just keep in mind and choose your exhaust housings carefully for your twins, and make sure you do a little tuning on your pump once you install out of this, ive found out the hard way when towing with big injectors and alot of fuel that its easy to get them egts threw the roof before you even get them turbos lighting. but its kind of easier with a stick cause you can control fuel with your foot. thats just my .02 cents