Delivery Valves
 

are 191's or lazer cut's or custom lazer cut's to hot to be used on the strret?
since i have a 215 pump i have the 181s and they seem to be sufficient. i just didnt know if they would be to hott for the street.
im looking in a set of sdx or smokem 5x14's too

191's were my fav for the street. I have full cuts now and do not like them at all.

Your 181 dv's should be enough for what you have

What you have should be plenty for you, but 191's or even a laser cut, just not a full cut would work on the street, it all depends on what your wanting to do with the truck and your setup.

i do mostly daily driving with some towing. so i dont need anything extreme. i just know lazer cuts are really hott. especially with a load behind you

I really like my DDP DVs. :tu:

191's all the way.:tu:

Lasers and full cuts are the same thing... On the street they are not friendly at all 191 is more than what any truck on here can use. 181's are nothing to cry about either...

im doing 191; with sdx 5x14s

im doing sdx 5x14s to i think.. soon

full cuts, no plate, and 27* timing is a good time

how are the cold starts?? haha

my truck at 26 degs is a little hard to start but not that bad. i have our custom lazer cuts in the 97

Can someone please explain what is "custom" about their laser cuts?

cold starts are great, just takes a little longer to warm up

---AutoMerged DoublePost---

nothin, if you have a lathe you can make laser cuts or what ever you want to call them. if you had the time and patience you could even "custom" cut a set for how you like to drive

The way I cut mine is not the same as everyone else, so should I call mine "custom"?

why not

smokem specials

---AutoMerged DoublePost---

weston is there going to be a price increase since the nozzle change
[color=grey][size=-2]

Yes there will be a price increase, $100 at most and only on certain sizes, but the new nozzles will be far better than the VCO stuff we used before. I call my delivery valves 15's, 90cc's more than a 191 @ 21mm rack.

ok cool just needed to know when i get with nick

"Custom" I guess.

http://photos-a.ak.fbcdn.net/hphotos..._1636110_n.jpg