Sun Coast Loc-Up Controller
I'm doing a 47RH swap into my 89 Cummins this winter. Instead of using switches and what not to control OD and TC Lock-up I was wondering if this would work.
Sun Coast Loc-Up Controller Sun Coast Converters Diesel Transmissions, Fort Walton Beach FL The ony problems I see are that I dont have a VSS or a TPS. Will this work as a stand alone controller in my application? |
no the lock up controler is not a stand alone but the tcm2000 is check into that
|
The TCM-2000 is for teh 47RE's
How does the 47RH put out its speed signal? Wire or cable? |
could be either
---AutoMerged DoublePost--- depending on the year |
:humm: why dont you just go to a 5 spd, isnt all its used for is pulling??
|
you can tap into the speed sensor on the back of the t case, it uses speed to lockup and shift the 3rd to 4th, thats what i was gonna use on my 47rh. It will work fine, just make sure you get the race version, that controls 3-4th shift.
DD |
Originally Posted by stkdram55
(Post 411469)
:humm: why dont you just go to a 5 spd, isnt all its used for is pulling??
Originally Posted by Diesel Dummy
(Post 411482)
you can tap into the speed sensor on the back of the t case, it uses speed to lockup and shift the 3rd to 4th, thats what i was gonna use on my 47rh. It will work fine, just make sure you get the race version, that controls 3-4th shift.
DD |
Originally Posted by RSWORDS
(Post 411450)
The TCM-2000 is for teh 47RE's
How does the 47RH put out its speed signal? Wire or cable? |
:pca1: learning
|
hey bobby , a friend of mine has a brand new BD Power locker you could get it for dirt cheap david.reed@bayerbms.com he dont have the truck anymore and the part is just sitting there , this is where i got the Edge Juice w/ Attitude for $200
|
All times are GMT -5. The time now is 11:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands