turbo? lost please help....
 

i have a 1995 dodge 3500 diesel with a holset H1C turbo that isnt working. The turbo locked up. I pulled the turbo apart and found pieces all kinds amd the intake fan was worn extremely bad. a local highway robber in corpus christi quoted me 899.99$ to rebuild it i walked away crying , but found one on ebay . the turbo is a H1C also , but is listed fo a 1988-1993 dodge i wish to find out if it is the same. oh and my truck is mainly stock but are there any other turbos that will work with my truck. all i have is a fuel plate 5 in straight pipe with stack thanks.

/me moves

i think they are the same you may need to clock it but an H1C is and H1C the flanges are the same on all of them so it will bolt up

check the for sale adds I'm sure you could find a h1c or an hx35 for way cheeper than $900. and a h1c from a 89-93 will fit on your truck I used to have one on mine.

is there a difference between the hc1 and the hx 35. i have found them alot cheaper then 900 , but no very little about turbos.

---AutoMerged DoublePost---

are there any weak points on these turbos that i need to no. there was only 50,000 miles on the motor when it self distructed. bought the motor new 3 years ago. payed out the ass for that motor from dodge.

go hx40

:hi: I sent Mike (XLR8R) a PM for you to see if he's got anything laying around his shop that might work for you. I also sent him a link to this thread. Hopefully that will turn something up for you.

thankyou for the help i went to the web site on XLR8R's page. damn nice stuff on there i had to go to another site that one was exciting me to muich.

You're welcome. Mike does some very nice custom fab work. It wouldn't take me long at all to spend a bunch of money buying toys there. Hopefully he will have something that will work for you or know sombody who does.
I have another guy I can check with tomorrow too.

Ryan, you might consider buying a rebuild kit for your turbo, or have it professionally rebuilt.
There's a place on the southern of DFW that does good work, and of course we recondition them as well.

Rebuild kits can run anywhere from $75-150, but don't bother if the compressor, turbine or housings are damaged.

Should be able to get a decent H1C for a LOT less than quoted!