Guess that horsepower!!
 

I'm tryin to guess what I got for horsepower. Haven't got it on Dino yet but will soon hopefully:tu:So as the title says guess the horsepower!

350-400 Is my guess.

Yeah, im guessing about 400ish ponies. Torque..........buttloads!!!!!:rocking:

Bout tree-fiddy...if eets dat dino from da deep...gawtdang loche ness monsta!!! :tttt:

But dependind on what Dyno and whether you can get the trans to load, I think H.R.D. nailed it. It's gonna be HOT though, I fear.

my guess will be much lower, you are way over fueled for that turbo and if all you have done is yanked the plate added 2x the size of stock injectors and the dirtiest DV's available with an untuned AFC it will be a hot smokey mess with sub par results on the rollers.

275-325 due to the fact that you prolly cant rev past 2200 rpms with your stock gov springs.

VVVRRROOOOOOOOMMMMM...POW....CHUGGA CHUGGA CHUGGA......"aw shit!!" :w2: Oh wait, that was my 04 Ford PSD........................:humm:

325

The pump has been tuned, I wouldn't go through all that without tuning it :tu: I also gotta set of 4k gov springs and 110lb valve springs to go in just have to find time. I'm hopin to creak the 300s. I would really like to break 400 but I'm not going to get hopes up.

why? you have a charger that is capable of 500hp

I'm just tryin to keep expectations down so when I find out its higher than expected

THats setting yourself up for a pleasant surprise..............:c:

arent the 1998 12valves have a computer and if im correct with those mods man and a smarty box tuned i bet you could hit 400hp if im correct

no a 98 is a 12 valve a 98.5 is a 24 vlave

With that small turbine 500 is gonna be a shot for a 12v ... the fuel lines he has are not helping him either

Why are the bigger lines bad?

lower pressures. you are trying to fill a bigger hose with the same size pump so delivery is retarded if you will. the guy above you will be able to explain this much better than me.